Simple Extensions to STLC

The simply typed lambda-calculus has enough structure to make its theoretical properties interesting, but it is not much of a programming language! In this chapter, we begin to close the gap with real-world languages by introducing a number of familiar features that have straightforward treatments at the level of typing.

Numbers

As we saw in exercise stlc_arith at the end of the StlcProp chapter, adding types, constants, and primitive operations for natural numbers is easy -- basically just a matter of combining the Types and Stlc chapters. Adding more realistic numeric types like machine integers and floats is also straightforward, though of course the specifications of the numeric primitives become more fiddly.

Let Bindings

When writing a complex expression, it is useful to be able to give names to some of its subexpressions to avoid repetition and increase readability. Most languages provide one or more ways of doing this. In OCaml (and Coq), for example, we can write let x=t₁ in t₂ to mean "reduce the expression t₁ to a value and bind the name x to this value while reducing t₂." Our let-binder follows OCaml in choosing a standard call-by-value evaluation order, where the let-bound term must be fully reduced before reduction of the let-body can begin. The typing rule T_Let tells us that the type of a let can be calculated by calculating the type of the let-bound term, extending the context with a binding with this type, and in this enriched context calculating the type of the body (which is then the type of the whole let expression). At this point in the book, it's probably easier simply to look at the rules defining this new feature than to wade through a lot of English text conveying the same information. Here they are: Syntax:

       t ::=                Terms
           | ...               (other terms same as before)
           | let x=t in t      let-binding

Reduction:

t1 --> t1'	(ST_Let1)
let x=t1 in t2 --> let x=t1' in t2

	(ST_LetValue)
let x=v1 in t2 --> [x:=v1]t2

Typing:

Gamma |-- t1 ∈ T1      x⊢>T1; Gamma |-- t2 ∈ T2	(T_Let)
Gamma |-- let x=t1 in t2 ∈ T2

Pairs

Our functional programming examples in Coq have made frequent use of pairs of values. The type of such a pair is called a product type. The formalization of pairs is almost too simple to be worth discussing. However, let's look briefly at the various parts of the definition to emphasize the common pattern. In Coq, the primitive way of extracting the components of a pair is pattern matching. An alternative is to take fst and snd -- the first- and second-projection operators -- as primitives. Just for fun, let's do our pairs this way. For example, here's how we'd write a function that takes a pair of numbers and returns the pair of their sum and difference:

       \x : Nat*Nat,
          let sum = x.fst + x.snd in
          let diff = x.fst - x.snd in
          (sum,diff)

Adding pairs to the simply typed lambda-calculus, then, involves adding two new forms of term -- pairing, written (t₁,t₂), and projection, written t.fst for the first projection from t and t.snd for the second projection -- plus one new type constructor, T₁×T₂, called the product of T₁ and T₂. Syntax:

       t ::=                Terms
           | ...
           | (t,t)             pair
           | t.fst             first projection
           | t.snd             second projection

       v ::=                Values
           | ...
           | (v,v)             pair value

       T ::=                Types
           | ...
           | T * T             product type

For reduction, we need several new rules specifying how pairs and projection behave.

t1 --> t1'	(ST_Pair1)
(t1,t2) --> (t1',t2)

t2 --> t2'	(ST_Pair2)
(v1,t2) --> (v1,t2')

t1 --> t1'	(ST_Fst1)
t1.fst --> t1'.fst

	(ST_FstPair)
(v1,v2).fst --> v1

t1 --> t1'	(ST_Snd1)
t1.snd --> t1'.snd

	(ST_SndPair)
(v1,v2).snd --> v2

Rules ST_FstPair and ST_SndPair say that, when a fully reduced pair meets a first or second projection, the result is the appropriate component. The congruence rules ST_Fst1 and ST_Snd1 allow reduction to proceed under projections, when the term being projected from has not yet been fully reduced. ST_Pair1 and ST_Pair2 reduce the parts of pairs: first the left part, and then -- when a value appears on the left -- the right part. The ordering arising from the use of the metavariables v and t in these rules enforces a left-to-right evaluation strategy for pairs. (Note the implicit convention that metavariables like v and v₁ can only denote values.) We've also added a clause to the definition of values, above, specifying that (v₁,v₂) is a value. The fact that the components of a pair value must themselves be values ensures that a pair passed as an argument to a function will be fully reduced before the function body starts executing. The typing rules for pairs and projections are straightforward.

Gamma |-- t1 ∈ T1     Gamma |-- t2 ∈ T2	(T_Pair)
Gamma |-- (t1,t2) ∈ T1*T2

Gamma |-- t0 ∈ T1*T2	(T_Fst)
Gamma |-- t0.fst ∈ T1

Gamma |-- t0 ∈ T1*T2	(T_Snd)
Gamma |-- t0.snd ∈ T2

T_Pair says that (t₁,t₂) has type T₁×T₂ if t₁ has type T₁ and t₂ has type T₂. Conversely, T_Fst and T_Snd tell us that, if t₀ has a product type T₁×T₂ (i.e., if it will reduce to a pair), then the types of the projections from this pair are T₁ and T₂.

Unit

Another handy base type, found especially in functional languages, is the singleton type Unit. It has a single element -- the term constant unit (with a small u) -- and a typing rule making unit an element of Unit. We also add unit to the set of possible values -- indeed, unit is the only possible result of reducing an expression of type Unit. Syntax:

       t ::=                Terms
           | ...               (other terms same as before)
           | unit              unit

       v ::=                Values
           | ...
           | unit              unit value

       T ::=                Types
           | ...
           | Unit              unit type

Typing:

	(T_Unit)
Gamma |-- unit ∈ Unit

It may seem a little strange to bother defining a type that has just one element -- after all, wouldn't every computation living in such a type be trivial? This is a fair question, and indeed in the STLC the Unit type is not especially critical (though we'll see two uses for it below). Where Unit really comes in handy is in richer languages with side effects -- e.g., assignment statements that mutate variables or pointers, exceptions and other sorts of nonlocal control structures, etc. In such languages, it is convenient to have a type for the (trivial) result of an expression that is evaluated only for its effect.

Sums

Many programs need to deal with values that can take two distinct forms. For example, we might identify students in a university database using either their name or their id number. A search function might return either a matching value or an error code. These are specific examples of a binary sum type (sometimes called a disjoint union), which describes a set of values drawn from one of two given types, e.g.:

       Nat + Bool

We create elements of these types by tagging elements of the component types. For example, if n is a Nat then inl n is an element of Nat+Bool; similarly, if b is a Bool then inr b is a Nat+Bool. The names of the tags inl and inr arise from thinking of them as functions

       inl ∈ Nat  -> Nat + Bool
       inr ∈ Bool -> Nat + Bool

that "inject" elements of Nat or Bool into the left and right components of the sum type Nat+Bool. (But note that we don't actually treat them as functions in the way we formalize them: inl and inr are keywords, and inl t and inr t are primitive syntactic forms, not function applications.) In general, the elements of a type T₁ + T₂ consist of the elements of T₁ tagged with the token inl, plus the elements of T₂ tagged with inr. As we've seen in Coq programming, one important use of sums is signaling errors:

      div ∈ Nat -> Nat -> (Nat + Unit)
      div =
        \x:Nat, \y:Nat,
          if iszero y then
            inr unit
          else
            inl ...

The type Nat + Unit above is in fact isomorphic to option nat in Coq -- i.e., it's easy to write functions that translate back and forth. To use elements of sum types, we introduce a case construct (a very simplified form of Coq's match) to destruct them. For example, the following procedure converts a Nat+Bool into a Nat:

    getNat ∈ Nat+Bool -> Nat
    getNat =
      \x:Nat+Bool,
        case x of
          inl n => n
        | inr b => if b then 1 else 0

More formally... Syntax:

       t ::=                Terms
           | ...               (other terms same as before)
           | inl T t           tagging (left)
           | inr T t           tagging (right)
           | case t of         case
               inl x => t
             | inr x => t

       v ::=                Values
           | ...
           | inl T v           tagged value (left)
           | inr T v           tagged value (right)

       T ::=                Types
           | ...
           | T + T             sum type

Reduction:

t1 --> t1'	(ST_Inl)
inl T2 t1 --> inl T2 t1'

t2 --> t2'	(ST_Inr)
inr T1 t2 --> inr T1 t2'

t0 --> t0'	(ST_Case)
case t0 of inl x1 => t1 | inr x2 => t2 -->
case t0' of inl x1 => t1 | inr x2 => t2

	(ST_CaseInl)
case (inl T2 v1) of inl x1 => t1 | inr x2 => t2
--> [x1:=v1]t1

	(ST_CaseInr)
case (inr T1 v2) of inl x1 => t1 | inr x2 => t2
--> [x2:=v2]t2

Typing:

Gamma |-- t1 ∈ T1	(T_Inl)
Gamma |-- inl T2 t1 ∈ T1 + T2

Gamma |-- t2 ∈ T2	(T_Inr)
Gamma |-- inr T1 t2 ∈ T1 + T2

Gamma |-- t0 ∈ T1+T2
x1⊢>T1; Gamma |-- t1 ∈ T3
x2⊢>T2; Gamma |-- t2 ∈ T3	(T_Case)
Gamma |-- case t0 of inl x1 => t1 | inr x2 => t2 ∈ T3

We use the type annotations on inl and inr to make the typing relation deterministic (each term has at most one type), as we did for functions. Without this extra information, the typing rule T_Inl, for example, would have to say that, once we have shown that t₁ is an element of type T₁, we can derive that inl t₁ is an element of T₁ + T₂ for any type T₂. For example, we could derive both inl 5 : Nat + Nat and inl 5 : Nat + Bool (and infinitely many other types). This peculiarity (technically, a failure of uniqueness of types) would mean that we cannot build a typechecking algorithm simply by "reading the rules from bottom to top" as we could for all the other features seen so far. There are various ways to deal with this difficulty. One simple one -- which we've adopted here -- forces the programmer to explicitly annotate the "other side" of a sum type when performing an injection. This is a bit heavy for programmers (so real languages adopt other solutions), but it is easy to understand and formalize.

Lists

The typing features we have seen can be classified into base types like Bool, and type constructors like → and × that build new types from old ones. Another useful type constructor is List. For every type T, the type List T describes finite-length lists whose elements are drawn from T. In principle, we could encode lists using pairs, sums and recursive types. But giving semantics to recursive types is non-trivial. Instead, we'll just discuss the special case of lists directly. Below we give the syntax, semantics, and typing rules for lists. Except for the fact that explicit type annotations are mandatory on nil and cannot appear on cons, these lists are essentially identical to those we built in Coq. We use case, rather than head and tail operators, to destruct lists, to avoid dealing with questions like "what is the head of the empty list?" For example, here is a function that calculates the sum of the first two elements of a list of numbers:

      \x:List Nat,
      case x of
        nil   => 0
        | a::x' => case x' of
                     nil    => a
                     | b::x'' => a+b

Syntax:

       t ::=                Terms
           | ...
           | nil T
           | cons t t
           | case t of
               nil     => t
               | x::x' => t

       v ::=                Values
           | ...
           | nil T             nil value
           | cons v v          cons value

       T ::=                Types
           | ...
           | List T            list of Ts

Reduction:

t1 --> t1'	(ST_Cons1)
cons t1 t2 --> cons t1' t2

t2 --> t2'	(ST_Cons2)
cons v1 t2 --> cons v1 t2'

t1 --> t1'	(ST_Lcase1)
(case t1 of nil => t2 | xh::xt => t3) -->
(case t1' of nil => t2 | xh::xt => t3)

	(ST_LcaseNil)
(case nil T1 of nil => t2 | xh::xt => t3)
--> t2

	(ST_LcaseCons)
(case (cons vh vt) of nil => t2 | xh::xt => t3)
--> [xh:=vh,xt:=vt]t3

Typing:

	(T_Nil)
Gamma |-- nil T1 ∈ List T1

Gamma |-- t1 ∈ T1      Gamma |-- t2 ∈ List T1	(T_Cons)
Gamma |-- cons t1 t2 ∈ List T1

Gamma |-- t1 ∈ List T1
Gamma |-- t2 ∈ T2
(h⊢>T1; t⊢>List T1; Gamma) |-- t3 ∈ T2	(T_Lcase)
Gamma |-- (case t1 of nil => t2 | h::t => t3) ∈ T2

General Recursion

Another facility found in most programming languages (including Coq) is the ability to define recursive functions. For example, we would like to be able to define the factorial function like this:

      let fact = \x:Nat,
             if x=0 then 1 else x * (fact (pred x))) in
      fact 3.

Note that the right-hand side of this binder mentions fact, the variable being bound -- something that is not allowed according to the way we defined let above. (The body of a let is typechecked in the same context as the let itself, which means that the recursive occurrence of fact in the body will not have a type in the context when it is looked up by the T_Var rule.)

Here is another way of presenting recursive functions that is a bit more verbose but equally powerful and much more straightforward to formalize: instead of writing recursive definitions, we will define a fixed-point operator called fix that performs the "unfolding" of the recursive definition in the right-hand side as needed, during reduction. For example, instead of

      fact = \x:Nat,
                if x=0 then 1 else x * (fact (pred x)))

we will write:

      fact =
          fix
            (\f:Nat->Nat,
               \x:Nat,
                  if x=0 then 1 else x * (f (pred x)))

We can derive the latter from the former as follows:

• In the right-hand side of the definition of fact, replace recursive references to fact by a fresh variable f.
• Add an abstraction binding f at the front, with an appropriate type annotation. (Since we are using f in place of fact, which had type Nat→Nat, we should require f to have the same type.) The new abstraction has type (Nat→Nat) → (Nat→Nat).
• Apply fix to this abstraction. This application has type Nat→Nat.
• Use all of this as the right-hand side of an ordinary let-binding for fact.

The intuition here is that the higher-order function f passed to fix is a generator for the fact function: if f is applied to a function that "approximates" the desired behavior of fact up to some number n (that is, a function that returns correct results on inputs less than or equal to n but we don't care what it does on inputs greater than n), then f returns a slightly better approximation to fact -- a function that returns correct results for inputs up to n+1. Applying fix to this generator returns its fixed point, which is a function that gives the desired behavior for all inputs n. (The term "fixed point" is used here in exactly the same sense as in ordinary mathematics, where a fixed point of a function f is an input x such that f(x) = x. Here, a fixed point of a function F of type (Nat→Nat)->(Nat→Nat) is a function f of type Nat→Nat such that F f behaves the same as f.) Syntax:

       t ::=                Terms
           | ...
           | fix t             fixed-point operator

Reduction:

t1 --> t1'	(ST_Fix1)
fix t1 --> fix t1'

	(ST_FixAbs)
fix (\xf:T1.t1) --> [xf:=fix (\xf:T1.t1)] t1

Typing:

Gamma |-- t1 ∈ T1->T1	(T_Fix)
Gamma |-- fix t1 ∈ T1

Let's see how ST_FixAbs works by reducing fact 3 = fix F 3, where

    F = (\f. \x. if x=0 then 1 else x * (f (pred x)))

(type annotations are omitted for brevity).

    fix F 3

--> ST_FixAbs + ST_App1

    (\x. if x=0 then 1 else x * (fix F (pred x))) 3

--> ST_AppAbs

    if 3=0 then 1 else 3 * (fix F (pred 3))

--> ST_If0_Nonzero

    3 * (fix F (pred 3))

--> ST_FixAbs + ST_Mult2

    3 * ((\x. if x=0 then 1 else x * (fix F (pred x))) (pred 3))

--> ST_PredNat + ST_Mult2 + ST_App2

    3 * ((\x. if x=0 then 1 else x * (fix F (pred x))) 2)

--> ST_AppAbs + ST_Mult2

    3 * (if 2=0 then 1 else 2 * (fix F (pred 2)))

--> ST_If0_Nonzero + ST_Mult2

    3 * (2 * (fix F (pred 2)))

--> ST_FixAbs + 2 x ST_Mult2

    3 * (2 * ((\x. if x=0 then 1 else x * (fix F (pred x))) (pred 2)))

--> ST_PredNat + 2 x ST_Mult2 + ST_App2

    3 * (2 * ((\x. if x=0 then 1 else x * (fix F (pred x))) 1))

--> ST_AppAbs + 2 x ST_Mult2

    3 * (2 * (if 1=0 then 1 else 1 * (fix F (pred 1))))

--> ST_If0_Nonzero + 2 x ST_Mult2

    3 * (2 * (1 * (fix F (pred 1))))

--> ST_FixAbs + 3 x ST_Mult2

    3 * (2 * (1 * ((\x. if x=0 then 1 else x * (fix F (pred x))) (pred 1))))

--> ST_PredNat + 3 x ST_Mult2 + ST_App2

    3 * (2 * (1 * ((\x. if x=0 then 1 else x * (fix F (pred x))) 0)))

--> ST_AppAbs + 3 x ST_Mult2

    3 * (2 * (1 * (if 0=0 then 1 else 0 * (fix F (pred 0)))))

--> ST_If0Zero + 3 x ST_Mult2

    3 * (2 * (1 * 1))

--> ST_MultNats + 2 x ST_Mult2

    3 * (2 * 1)

--> ST_MultNats + ST_Mult2

    3 * 2

--> ST_MultNats

    6

Exercise: 1 star, standard, optional (halve_fix)

Translate this informal recursive definition into one using fix:

      halve =
        \x:Nat,
           if x=0 then 0
           else if (pred x)=0 then 0
           else 1 + (halve (pred (pred x)))

(* FILL IN HERE *)
☐

Exercise: 1 star, standard, optional (fact_steps)

Write down the sequence of steps that the term fact 1 goes through to reduce to a normal form (assuming the usual reduction rules for arithmetic operations). (* FILL IN HERE *)
☐ The ability to form the fixed point of a function of type T→T for any T has some surprising consequences. In particular, it implies that every type is inhabited by some term. To see this, observe that, for every type T, we can define the term
    fix (\x:T,x) By T_Fix and T_Abs, this term has type T. By ST_FixAbs it reduces to itself, over and over again. Thus it is a diverging element of T. More usefully, here's an example using fix to define a two-argument recursive function:

    equal =
      fix
        (\eq:Nat->Nat->Bool,
           \m:Nat, \n:Nat,
             if m=0 then iszero n
             else if n=0 then fls
             else eq (pred m) (pred n))

And finally, here is an example where fix is used to define a pair of recursive functions (illustrating the fact that the type T₁ in the rule T_Fix need not be a function type):

      evenodd =
        fix
          (\eo: (Nat->Bool * Nat->Bool),
             let e = \n:Nat, if n=0 then tru else eo.snd (pred n) in
             let o = \n:Nat, if n=0 then fls else eo.fst (pred n) in
             (e,o))

      even = evenodd.fst
      odd  = evenodd.snd

Records

As a final example of a basic extension of the STLC, let's look briefly at how to define records and their types. Intuitively, records can be obtained from pairs by two straightforward generalizations: they are n-ary (rather than just binary) and their fields are accessed by label (rather than position). Syntax:

       t ::=                          Terms
           | ...
           | {i1=t1, ..., in=tn}         record
           | t.i                         projection

       v ::=                          Values
           | ...
           | {i1=v1, ..., in=vn}         record value

       T ::=                          Types
           | ...
           | {i1:T1, ..., in:Tn}         record type

The generalization from products should be pretty obvious. But it's worth noticing the ways in which what we've actually written is even more informal than the informal syntax we've used in previous sections and chapters: we've used "..." in several places to mean "any number of these," and we've omitted explicit mention of the usual side condition that the labels of a record should not contain any repetitions. Reduction:

ti --> ti'	(ST_Rcd)
{i1=v1, ..., im=vm, in=ti , ...}
--> {i1=v1, ..., im=vm, in=ti', ...}

t0 --> t0'	(ST_Proj1)
t0.i --> t0'.i

	(ST_ProjRcd)
{..., i=vi, ...}.i --> vi

Again, these rules are a bit informal. For example, the first rule is intended to be read "if ti is the leftmost field that is not a value and if ti steps to ti', then the whole record steps..." In the last rule, the intention is that there should be only one field called i, and that all the other fields must contain values. The typing rules are also simple:

Gamma |-- t1 ∈ T1     ...     Gamma |-- tn ∈ Tn	(T_Rcd)
Gamma |-- {i1=t1, ..., in=tn} ∈ {i1:T1, ..., in:Tn}

Gamma |-- t0 ∈ {..., i:Ti, ...}	(T_Proj)
Gamma |-- t0.i ∈ Ti

There are several ways to approach formalizing the above definitions.

• We can directly formalize the syntactic forms and inference rules, staying as close as possible to the form we've given them above. This is conceptually straightforward, and it's probably what we'd want to do if we were building a real compiler (in particular, it will allow us to print error messages in the form that programmers will find easy to understand). But the formal versions of the rules will not be very pretty or easy to work with, because all the ...s above will have to be replaced with explicit quantifications or comprehensions. For this reason, records are not included in the extended exercise at the end of this chapter. (It is still useful to discuss them informally here because they will help motivate the addition of subtyping to the type system when we get to the Sub chapter.)
• Alternatively, we could look for a smoother way of presenting records -- for example, a binary presentation with one constructor for the empty record and another constructor for adding a single field to an existing record, instead of a single monolithic constructor that builds a whole record at once. This is the right way to go if we are primarily interested in studying the metatheory of the calculi with records, since it leads to clean and elegant definitions and proofs. Chapter Records shows how this can be done.
• Finally, if we like, we can avoid formalizing records altogether, by stipulating that record notations are just informal shorthands for more complex expressions involving pairs and product types. We sketch this approach in the next section.

Encoding Records (Optional)

Let's see how records can be encoded using just pairs and unit. (This clever encoding, as well as the observation that it also extends to systems with subtyping, is due to Luca Cardelli.) First, observe that we can encode arbitrary-size tuples using nested pairs and the unit value. To avoid overloading the pair notation (t₁,t₂), we'll use curly braces without labels to write down tuples, so {} is the empty tuple, {5} is a singleton tuple, {5,6} is a 2-tuple (morally the same as a pair), {5,6,7} is a triple, etc.

      {} ----> unit {t1, t2, ..., tn} ----> (t1, trest) where {t2,
      ..., tn} ----> trest

Similarly, we can encode tuple types using nested product types:

      {} ----> Unit {T1, T2, ..., Tn} ----> T1 * TRest where {T2, ...,
      Tn} ----> TRest

The operation of projecting a field from a tuple can be encoded using a sequence of second projections followed by a first projection:

      t.0 ----> t.fst t.(n+1) ----> (t.snd).n

Next, suppose that there is some total ordering on record labels, so that we can associate each label with a unique natural number. This number is called the position of the label. For example, we might assign positions like this:

      LABEL POSITION a 0 b 1 c 2 ...  ...  bar 1395 ...  ...  foo 4460
      ...  ...

We use these positions to encode record values as tuples (i.e., as nested pairs) by sorting the fields according to their positions. For example:

      {a=5,b=6} ----> {5,6} {a=5,c=7} ----> {5,unit,7} {c=7,a=5} ---->
      {5,unit,7} {c=5,b=3} ----> {unit,3,5} {f=8,c=5,a=7} ---->
      {7,unit,5,unit,unit,8} {f=8,c=5} ----> {unit,unit,5,unit,unit,8}

Note that each field appears in the position associated with its label, that the size of the tuple is determined by the label with the highest position, and that we fill in unused positions with unit. We do exactly the same thing with record types:

      {a:Nat,b:Nat} ----> {Nat,Nat} {c:Nat,a:Nat} ----> {Nat,Unit,Nat}
      {f:Nat,c:Nat} ----> {Unit,Unit,Nat,Unit,Unit,Nat}

Finally, record projection is encoded as a tuple projection from the appropriate position:

      t.l ----> t.(position of l)

It is not hard to check that all the typing rules for the original "direct" presentation of records are validated by this encoding. (The reduction rules are "almost validated" -- not quite, because the encoding reorders fields.) Of course, this encoding will not be very efficient if we happen to use a record with label foo! But things are not actually as bad as they might seem: for example, if we assume that our compiler can see the whole program at the same time, we can choose the numbering of labels so that we assign small positions to the most frequently used labels. Indeed, there are industrial compilers that essentially do this!

Variants (Optional)

Just as products can be generalized to records, sums can be generalized to n-ary labeled types called variants. Instead of T₁+T₂, we can write something like <l₁:T₁,l₂:T₂,...ln:Tn> where l₁,l₂,... are field labels which are used both to build instances and as case arm labels. These n-ary variants give us almost enough mechanism to build arbitrary inductive data types like lists and trees from scratch -- the only thing missing is a way to allow recursion in type definitions. We won't cover this here, but detailed treatments can be found in many textbooks -- e.g., Types and Programming Languages [Pierce 2002].

Exercise: Formalizing the Extensions

In this series of exercises, you will formalize some of the extensions described in this chapter. We've provided the necessary additions to the syntax of terms and types, and we've included a few examples that you can test your definitions with to make sure they are working as expected. You'll fill in the rest of the definitions and extend all the proofs accordingly. To get you started, we've provided implementations for:

• numbers
• sums
• lists
• unit

You need to complete the implementations for:

• pairs
• let (which involves binding)
• fix

A good strategy is to work on the extensions one at a time, in separate passes, rather than trying to work through the file from start to finish in a single pass. For each definition or proof, begin by reading carefully through the parts that are provided for you, referring to the text in the Stlc chapter for high-level intuitions and the embedded comments for detailed mechanics.

Syntax

Note that, for brevity, we've omitted booleans and instead provided a single if₀ form combining a zero test and a conditional. That is, instead of writing

       if x = 0 then ... else ...

we'll write this:

       if0 x then ... else ...

Substitution

Exercise: 3 stars, standard (STLCExtended.subst)

Reduction

Next we define the values of our language.

Exercise: 3 stars, standard (STLCExtended.step)

Typing

Next we define the typing rules. These are nearly direct transcriptions of the inference rules shown above.

Exercise: 3 stars, standard (STLCExtended.has_type)

Examples

Exercise: 5 stars, standard, optional (STLCExtended_examples)

This section presents formalized versions of the examples from above (plus several more). For each example, uncomment proofs and replace Admitted by Qed once you've implemented enough of the definitions for the tests to pass. The examples at the beginning focus on specific features; you can use these to make sure your definition of a given feature is reasonable before moving on to extending the proofs later in the file with the cases relating to this feature. The later examples require all the features together, so you'll need to come back to these when you've got all the definitions filled in.

Preliminaries

First, let's define a few variable names:

Next, a bit of Coq hackery to automate searching for typing derivations. You don't need to understand this bit in detail -- just have a look over it so that you'll know what to look for if you ever find yourself needing to make custom extensions to auto. The following Hint declarations say that, whenever auto arrives at a goal of the form (Gamma |-- (tm_app e₁ e₁) \in T), it should consider eapply T_App, leaving an existential variable for the middle type T₁, and similar for lcase. That variable will then be filled in during the search for type derivations for e₁ and e₂. We also include a hint to "try harder" when solving equality goals; this is useful to automate uses of T_Var (which includes an equality as a precondition).

Numbers

Products

let

Sums